| REXROTH ZDR6DP2-4X/25Y Valves | s1:27.8 mm; d:50.8 mm; H2:124.5 mm; Z:77.7 mm; G:R1/8"; L:222 mm; Designation of open end cover:SCOU211-32; C:43.55 kN; H1:22.5 mm; N:18mm; |
| REXROTH Z2FS10-5-3X/SV Valves | T min.:-20 °C; T max.:100 °C; J:101.6 mm; d:47.62 mm; A1:34 mm; Designation of bearing:US210-30G2; Weight:2.4 kg; Designation of housing:PAE210N-; L1:33.5 mm; S:10.9 mm; |
| REXROTH 4WE6T7X/HG24N9K4 Valves | ras max:0.3 mm; Brand:NTN; Mass:0.0037 kg; rs min:0.3 mm; Lubrication hole on inner ring:Non/No; t:1 mm; Precision class:P0; B:10 mm; F:10 mm; d:6 mm; |
| REXROTH DBE20-3X/315YG24N9K4 Valves | Recommended tightening torque for set screw:3.7 Nm; J:50.8 mm; T min.:-40 °C; T max.:100 °C; A:32 mm; Dz:54 mm; L:65 mm; G:R1/8"; Designation of bearing:US204-12G2T04; N:M8; |
| REXROTH M-3SEW 6 C3X/630MG205N9K4 R900053414 Valves | S:10.9 mm; Designation of bearing:US210-31G2; T max.:100 °C; s1:21.75 mm; Weight:3.58 kg; H:110 mm; Recommended tightening torque for set screw:8 Nm; J:159 mm; C:35.1 kN; H2:165 mm; |
| REXROTH 4WE6C7X/OFHG24N9K4/B10 Valves | r1s min:2.1 mm; Characteristic cage frequency, FTF:0.4 Hz; D:130 mm; Min operating temperature, Tmin:-40 °C; Nlim (oil):5,200 rpm; d:60 mm; Category:Bearings; da max:75 mm; Static load, C0:262 kN; Weight / Kilogram:3.015; |
| REXROTH DBW20B1-5X/50-6EG24N9K4/V Valves | S:7.5 mm; J:90 mm; A:20 mm; B1:30.9 mm; d1:37.4 mm; L:115 mm; C:14 kN; B:21.4 mm; d:25.4 mm; s1:24.2 mm; |
| REXROTH DBW10B1-5X/200-6EG24N9K4/V Valves | C0:4.78 kN; L:119 mm; Recommended tightening torque for set screw:3.2 Nm; T min.:-40 °C; S:6 mm; B:22 mm; T max.:100 °C; A1:20.5 mm; d:12.7 mm; N:11mm; |
| REXROTH S6A1.0 Valves | Characteristic inner ring frequency, BPFI:6.4 Hz; Min operating temperature, Tmin:-20 °C; f0:14.8; Da max:26 mm; Characteristic rolling element frequency, BSF:5.98 Hz; Max operating temperature, Tmax:120 °C; Mass:0.02 kg; Static load, C0:2 kN; Nlim (grease):24,000 rpm; Brand:NTN; |
| REXROTH S6A2.0 Valves | Weight:2.62 kg; G:M6x1; T max.:100 °C; A1:10 mm; C:31.85 kN; C0:20.8 kN; Recommended tightening torque for set screw:8 Nm; B:30.2 mm; T min.:-40 °C; Designation of housing:FC209-; |