| REXROTH DBW30B2-5X/100-6EG24N9K4/V Valves | C0:140 kN; H:290 mm; S:50 mm; d:100 mm; G:M10x1; T max.:200 °C; Designation of housing:T320-; B:100 mm; s1:86.5 mm; H1:260 mm; |
| REXROTH DR20-2-5X/100YM Valves | H:98 mm; s1:21.45 mm; Designation of bearing:UC207G2; SW:4 mm; Weight:1.87 kg; T max.:100 °C; A5:25.4 mm; C:25.7 kN; d:35 mm; Designation of housing:SP206-207/72N-; |
| REXROTH DBW30B1-5X/50-6EG24N9K4 Valves | Y2:3.82; Mass:0.54 kg; Static load, C0:7.9 kN; Precision class:P0; Nref:8,100 rpm; d1:51.3 mm; Da max:72 mm; ra max:1.5 mm; D:80 mm; Y0:2.59; |
| REXROTH DBE20-3X/100YG24N9K4 Valves | Brand:NTN; Mass (without HJ ring):0.59 kg; d:25 mm; r1s min:1.5 mm; Static load, C0:40 kN; Fatigue limit load, Cu:4.9 kN; Nlim (oil):10,000 rpm; da min:33 mm; E:62.8 mm; Max operating temperature, Tmax:120 °C; |
| REXROTH 4WE10A3X/OFCW230N9K4 Valves | Retainer Type:Std Retainer; Retainer Material:Nylon; Ball Grade:Class 10; Ship Weight:1.6 LB; Self Aligning:Self Centering; Housing Coating:Powder Coat; Bearing Outer Ring Material:Steel; Bearing Family:Setscrew Ball Bearin; Flinger Material:Steel; Bearing Locking Device:Setscrew; |
| REXROTH 4WE6F7X/HG24N9K4/V Valves | H:161 mm; Designation of housing:FL207N-; d:35 mm; J:130 mm; A2:44.4 mm; Designation of open end cover:SCO207-35; C:25.7 kN; T max.:200 °C; N:16mm; Dz:80 mm; |
| REXROTH DBW20B2-5X/350-6EG24N9K4/V Valves | A2:29.5 mm; A:27 mm; S:7.5 mm; L:115 mm; A4:21 mm; C:14 kN; Designation of housing:FC205-; H3:70; T max.:100 °C; e:10 mm; |
| REXROTH 4WE6W6X/EW230N9K4/B10 Valves | S:30.9 mm; L:150 mm; d:61.91 mm; L1:50 mm; Designation of bearing:EX212-39G2L3; B1:77.7 mm; Weight:4.86 kg; H1:25 mm; N:M16; E:25 mm; |
| REXROTH 3WE6A6X/EW230N9K4/B10 Valves | s1:40.85 mm; Z:41.7 mm; T min.:-20 °C; Designation of housing:SF212N-; A:48 mm; C:41 kN; C0:31.5 kN; d:60 mm; A1:20 mm; Recommended tightening torque for set screw:18.7 Nm; |
| REXROTH 4WE10A5X/OFEG24N9K4/M Valves | L:165 mm; C:19.5 kN; J:121 mm; Designation of housing:P206-; H2:83 mm; T min.:-20 °C; L1:54 mm; s1:19.05 mm; Recommended tightening torque for set screw:3.7 Nm; G:M6x1; |