| REXROTH 4WE6L6X/EW230N9K4/B10 Valves | Base to Center Height:Low; UPC:782475114115; Max Bearing Speed:6500 rpm; Bearing Inner Ring Material:Steel; Bearing Duty:Normal Duty; Seal Type:Single Lip; Housing Coating:Powder Coat; Ball Material:Steel; Ball Grade:Class 10; Flinger Type:Rubberized; |
| REXROTH 4WE6B6X/OFEW230N9K4/V Valves | Recommended tightening torque for set screw:3.7 Nm; SW:3.18 mm; G:M6x1; C0:15.2 kN; A:28 mm; C:27 kN; H:100 mm; Weight:1.26 kg; T min.:-40 °C; A5:26 mm; |
| REXROTH 4WE6M7X/HG24N9K4/B10 Valves | S:18.8 mm; B1:51.1 mm; e:19 mm; N:16mm; d:31.75 mm; G:M6x1; B:37.6 mm; A2:51.3 mm; Designation of bearing:EX207-20G2T20; L:90 mm; |
| REXROTH 4WE6W6X/EW230N9K4/V Valves | S:17.5 mm; s1:21.45 mm; Weight:1.36 kg; Designation of housing:PAE207N-; J:82.6 mm; Designation of closed end cover:SCC207; L1:22.5 mm; E:12.5 mm; d:36.51 mm; Dz:80 mm; |
| REXROTH ZDR6DP0-4X/45YM W80 Valves | da min:25 mm; Internal Special Features:No; Brand:NTN; Outside Diameter:1.85 Inch | 47 Milli; Dynamic load, C:12.8 kN; UNSPSC:31171504; Fatigue limit load, Cu:0.3 kN; Min operating temperature, Tmin:-20 °C; Harmonized Tariff Code:8482.10.50.68; Rolling Element:Ball Bearing; |
| REXROTH S8A1.0 Valves | Dz:54 mm; T max.:100 °C; Recommended tightening torque for set screw:5.5 Nm; L1:225 mm; d:20 mm; C0:6.65 kN; H2:41 mm; A5:13.9 mm; A:21 mm; d1:32.4 mm; |
| REXROTH DR20-2-5X/100Y Valves | End Cap Groove:Yes; Bearing Series:205 Series; Seal Type:Triple Lip; Base to Center Height:Standard; Ball Bearing Housing Series:205 Series; Bearing Outer Ring Material:Steel; Ball Material:440 STAINLESS STEEL; Housing Coating:No Coating; Flinger Material:Stainless Steel; Bearing Insert Material:Nickel-Coated Steel; |
| REXROTH 4WE6W6X/EW230N9K4/B10 Valves | S:30.9 mm; L:150 mm; d:61.91 mm; L1:50 mm; Designation of bearing:EX212-39G2L3; B1:77.7 mm; Weight:4.86 kg; H1:25 mm; N:M16; E:25 mm; |
| REXROTH 4WE10B5X/OFEG24N9K4/M Valves | e:19 mm; Designation of housing:FLE204N-; A2:37.3 mm; C:12.8 kN; N:11,5mm; d:15 mm; A1:10 mm; G:R1/8"; Recommended tightening torque for set screw:5.5 Nm; S:12.7 mm; |
| REXROTH S10P02-1X Valves | B:10 mm; Fatigue limit load, Cu:0.15 kN; Min operating temperature, Tmin:-25 °C; da max:21 mm; Radial clearance class:CN; Characteristic cage frequency, FTF:0.39 Hz; Mass:0.04 kg; ra max:0.3 mm; Nlim (grease):20,000 rpm; rs min:0.3 mm; |