| REXROTH DBW30B2-5X/50-6EG24N9K4/V Valves | d:12.7 mm; s1:30.5 mm; Weight:0.59 kg; A5:17 mm; T max.:100 °C; T min.:-20 °C; B:34 mm; G:M6x1; A3:1.5 mm; C0:6.65 kN; |
| REXROTH DBE10-3X/100YG24N9K4 Valves | Weight:1.73 kg; Designation of housing:P207N-; Dz:80 mm; T min.:-40 °C; d:34.92 mm; H:47.6 mm; C:25.7 kN; T max.:100 °C; Z:60 mm; S:17.5 mm; |
| REXROTH DBE30-3X/315YG24N9K4 Valves | Dynamic load, C:169 kN; Characteristic inner ring frequency, BPFI:8.33 Hz; Characteristic outer ring frequency, BPF0:5.67 Hz; da min:49 mm; d:40 mm; Da max:81 mm; Nlim:7,400 rpm; Mass:0.94 kg; B:33 mm; Static load, C0:152 kN; |
| REXROTH 4WE6R7X/HG24N9K4/B10 Valves | B:45 mm; f0:13.3; Radial clearance class:C3; Fatigue limit load, Cu:4.45 kN; da max:118.3 mm; Characteristic inner ring frequency, BPFI:4.9 Hz; Da max:187 mm; Max operating temperature, Tmax:120 °C; Dynamic load, C:152 kN; d:95 mm; |
| REXROTH DBW30B2-5X/100-6EG24N9K4/V Valves | C0:140 kN; H:290 mm; S:50 mm; d:100 mm; G:M10x1; T max.:200 °C; Designation of housing:T320-; B:100 mm; s1:86.5 mm; H1:260 mm; |
| REXROTH DBW10B2-5X/100-6EG24N9K4/V Valves | B1:43.5 mm; C:12.8 kN; L:86 mm; d:17 mm; A2:41.5 mm; Recommended tightening torque for set screw:5.5 Nm; Designation of bearing:EX203G2L4; d1:32.4 mm; C0:6.65 kN; J:64 mm; |
| REXROTH 4WMM6D5X/V Valves | d1:50 mm; e:18 mm; N:23mm; A1:15 mm; d:30.16 mm; T max.:100 °C; Designation of housing:FL306-; L:90 mm; Designation of bearing:EX306-19G2T04; C:27 kN; |
| REXROTH 4WE6B7X/OFHG24N9K4/V Valves | Ball Bearing Housing Series:204 Series; Flinger Type:Rubberized; Expansion Type:Non-Expansion; Bearing Locking Device:Eccentric Collar; Flinger Material:Steel; Bearing Outer Ring Material:Steel; Housing Type:Narrow Slot Take-Up; Brand:Baldor-Dodge; End Cap Groove:No; Bearing Duty:Normal Duty; |
| REXROTH M-3SED 6 CK1X/350CG205N9K4 R900223863 Valves | Weight:0.63 kg; L:91 mm; T max.:200 °C; Recommended tightening torque for set screw:5.5 Nm; B:19.1 mm; C0:4.78 kN; E:21 mm; SW:3 mm; A:25 mm; d:15 mm; |
| REXROTH 4WE6R6X/EW230N9K4/B10 Valves | r1s min:1.1 mm; dc min:53 mm; d1:51 mm; Fatigue limit load, Cu:8.7 kN; Characteristic inner ring frequency, BPFI:7.84 Hz; Static load, C0:71 kN; Radial clearance class:C3; Category:Bearings; rs min:1.5 mm; Weight / Kilogram:0.503; |