| A18-89P1 Rotek Slewing Ring Bearings | D:14 mm; d:4 mm; Bore Diameter (mm):4; Size (mm):4x14x2; H:2 mm; Bearing number:AXK 0414; Outer Diameter (mm):14; Width (mm):2; |
| S14-90E1 Rotek Slewing Ring Bearings | d:15 mm; D:32 mm; Bore Diameter (mm):15; Size (mm):15x32x8; Width (mm):8; B:8 mm; Outer Diameter (mm):32; C:8 mm; Bearing number:16002-2RS; |
| W16-84P1 Rotek Slewing Ring Bearings | D:57,15 mm; Basic dynamic load rating (C):56 kN; Basic static load rating (C0):130 kN; Fw:47,625 mm; Outer Diameter (mm):57,15; Width (mm):25,4; C:25,4 mm; C1:3,05 mm; Bearing number:M-30161; (Grease) Lubrication Speed:2300 r/min; Bore Diameter (mm):47,625; Size (mm):47.625x57.15x25.4; Weight:0,132 Kg; |
| 62.20.0450.000.11.1503 Standard 5 Slewing Ring Bearings | rmin:2,1 mm; Cr:310000 N / Dynamic l; da max:123 mm; nB:3450 1/min; Bearing number:NU221-E-TVP2; Da max:178 mm; Cur:39500 N / Fatigue li; d:105 mm; db min:128 mm; Bore Diameter (mm):105; D:190 mm; s:1,3 mm / Axial displ; E:171,5 mm; m:4,08 kg / Weight; B:36 mm; nG:4350 1/min / Limitin; F:125,5 mm; C0r:320000 N / Static lo; Size (mm):105x190x36; ra1 max:2,1 mm; |
| 161.20.0560.891.21.1503 Standard 5 Slewing Ring Bearings | Bearing number:130TBH10DB; 2B:63 mm; r1 min.:1 mm; D:200 mm; d:130 mm; Angle (α):40 °; Width (mm):31,5; Size (mm):130x200x31.5; Outer Diameter (mm):200; r min.:2 mm; Bore Diameter (mm):130; Basic dynamic load rating (C):118 kN; B:31,5 mm; Basic static load rating (C0):350 kN; (Grease) Lubrication Speed:3000 r/min; |
| 3R6-55P9 Rotek Slewing Ring Bearings | Bearing number:7072 A-UO; Basic static load rating (C0):1830 kN; Bore Diameter (mm):360; Weight:129,2 Kg; Size (mm):360x540x164; B1:164 mm; Width (mm):164; Angle (α):25 °; Outer Diameter (mm):540; (Grease) Lubrication Speed:800 r/min; Basic dynamic load rating (C):837 kN; D:540 mm; d:360 mm; a:341,8 mm; |
| 60.20.0544.500.01.1503 Standard 5 Slewing Ring Bearings | Outer Diameter (mm):280; B:65 mm; Width (mm):65; Bore Diameter (mm):110; C:65 mm; Bearing number:6422; D:280 mm; Size (mm):110x280x65; d:110 mm; |
| R8-35N3 Rotek Slewing Ring Bearings | r - Cup Backface To Clear Radius1:0.050 in; D:3.1496 in; Y - ISO Factor3:2.2; Cup Part Number:332; Series:335; Cg - Geometry Factor:0.0676; Db - Cup Backface Backing Diameter:2.87 in; C - Cup Width:0.7018 in; Design Units:Imperial; e - ISO Factor2:0.27; Da - Cup Frontface Backing Diameter:2.99 in; |